Buy Dock Building, Hardware and Repair Supplies

Item / Image (Click image to enlarge)Price

Angle

Commercial Grade. Use this heavy-duty angle for all cross supports. Each leg measures 2-1/2"L x 5"H.
AngleAngle$3.80
Quantity:

Backing Plate

5"x 5" reinforcing plates are used to back up the Single T Males and Females. Commercial Grade
Backing PlateBacking Plate$3.25
Quantity:

Black Rub Rail

Med, 3 1/4in high x 2in wide. Price per 10 foot length
Black Rub Rail$20.00Please call us for
shipping costs
(434)-374-2560

Bolt Set - Carriage 1/2 in x 3 in with nut & washer

Used to attach A through K component parts. 1/2 in x 3 in bolt, flat washer and nut. Hot dip galvanized.
Bolt Set - Carriage 1/2 in x 3 in with nut & washerBolt Set - Carriage 1/2 in x 3 in with nut & washer$0.95
Quantity:

Bolt Set - Hex 3/4 in x 3 1/2 in with nut

Includes lock nut. Used to connect male and female T connectors. Galvanized. 3/4" x 3-1/2". Commercial Grade.
Bolt Set - Hex 3/4 in x 3 1/2 in with nutBolt Set - Hex 3/4 in x 3 1/2 in with nut$3.60
Quantity:

Chain Holder

Bolts to side of dock. Use weights and chains to hold dock in place. Accommodates 1/4", 3/8", & 1/2" chain. Measures 5"L x 5"H. Commercial Grade.
Chain HolderChain Holder$12.50
Quantity:

Connector Pin Set

For quick disconnect. Used to connect male and female T connectors. Galvanized 3/4" connector pin and hitch clip pin.
Connector Pin SetConnector Pin Set$6.90
Quantity:

Corner Bumper

10 x 10, Black
Corner Bumper$20.99
Quantity:

Corner Bumper

6 x 6, Black
Corner BumperCorner Bumper$17.99
Quantity:

Inside Corner

This heavy- duty inside corner should be used with one of the outside corners. Each leg has elongated holes for easy fit-up and is 8-1/2"L x 5"H.
Inside CornerInside Corner$14.99
Quantity:

Jet Ski Permaport Plus

PermaPort Plus are ports designed for today's larger jet skis and can attach to floating and fixed docks.
mounting hardware sold separately
Jet Ski Permaport PlusJet Ski Permaport Plus$1450.00 Please call us for
mounting kit prices
and freight costs
(434) 374-2560

Ladder

4 Steps, Wide Swing. Please contact us for Shipping Costs.
Ladder$229.00Please call us for
shipping costs
(434)-374-2560

Ladder

5 Steps, Wide Swing. Please contact us for Shipping Costs.
Ladder$239.00Please call us for
shipping costs
(434)-374-2560

Outside Corner - End

Use this corner at ends of fingers and docks. Ideal for swim floats and ski jump corners. Each leg is 10"L x 5"H.
Outside Corner - EndOutside Corner - End$14.70
Quantity:

Outside Corner - Female

Has two 1/2" welded tabs. Use with a male outside corner. Each leg is 10"L x 5"H.
Outside Corner - FemaleOutside Corner - Female$24.10
Quantity:

Outside Corner - Male

Has one 1/2" welded tab. Use with a female outside corner to connect docks end to end. Joint requires 3/4" bolt set (N) or connector pin (O). Each leg is 10"L x 5" H.
Outside Corner - MaleOutside Corner - Male$20.70
Quantity:

Permafloat 12 x 24 x 48

Please contact us for Shipping Costs.
Permafloat 12 x 24 x 48Permafloat 12 x 24 x 48$92.00Please call us for
shipping costs
(434)-374-2560

Permafloat 12 x 48 x 48

Please contact us for Shipping Costs.
Permafloat 12 x 48 x 48Permafloat 12 x 48 x 48$159.00Please call us for
shipping costs
(434)-374-2560

Permafloat 16 x 24 x 48

Please contact us for Shipping Costs.
Permafloat 16 x 24 x 48Permafloat 16 x 24 x 48$110.00Please call us for
shipping costs
(434)-374-2560

Permafloat 16 x 48 x 48

Please contact us for Shipping Costs.
Permafloat 16 x 48 x 48Permafloat 16 x 48 x 48$198.00Please call us for
shipping costs
(434)-374-2560

Piling Hoop & Roller Assembly (Heavy Duty)

Intended for areas with lots of wind, current, or tidal action. Combines the Piling Hoop (Model 26412) and Roller Assembly (Model 26414) to make up and down movement easier. For pilings up to 12" in diameter.
Piling Hoop & Roller Assembly (Heavy Duty)Piling Hoop & Roller Assembly (Heavy Duty)$118.00
Quantity:

Piling Hoop (Stainless Steel)

Heavy Duty 1/4in Stainless Steel x 5in high. Commercial Grade 10in Dia.
Piling Hoop (Stainless Steel)$139.99
Quantity:

Pipe Holder - Outside 3 in.

Bolts to outside of dock. Carriage bolt set (M) required for attaching. Use 2" pipe to hold dock in place. Commercial Grade.
Pipe Holder - Outside 3 in.Pipe Holder - Outside 3 in.$20.70
Quantity:

Roller Assembly (Heavy Duty)

Bracket and roller bolt directly to the Deck Plate (Model 26416) and can be added to aid up-and-down motion of the dock in areas with tidal action. 6" roller turns on a 5/8" diameter shaft. 3/8" bracket is hot-dipped galvanized.
Roller Assembly (Heavy Duty)Roller Assembly (Heavy Duty)$35.00
Quantity:

Safety Cleat

6in. Fold down (item is cast, not black)
Safety CleatSafety Cleat$21.20
Quantity:

T Connector - 3/4 in. Female

Commercial Grade. Has two welded 1/2" tabs. Bolts to side of dock to attach fingers and ramps. 5"L x5"H.
T Connector - 3/4 in. Female T Connector - 3/4 in. Female $13.40
Quantity:

T Connector - 3/4 in. Male

Has one welded 1/2" tab. Use with female T connector to attach fingers and ramps. 5"L x 5"H. 3/4" bolt set (N) required for joint.
T Connector - 3/4 in. MaleT Connector - 3/4 in. Male$10.80
Quantity:

Washer Plate

Use two washer plates with each angle. Measures 1-1/2"L x 5"H. Commercial Grade.
Washer PlateWasher Plate$1.55
Quantity: